What to Verify Before Choosing an Englander Stove

Scope and verification note: This is an undated catalog snapshot and pre-purchase verification framework, not a complete specifications guide or installation manual. The supplied evidence does not establish when the listings were captured, so every price, stock status, promotion, and fulfillment estimate must be reconfirmed before publication or purchase. Installation decisions must be governed by the manual and certification record for the exact appliance, applicable local requirements, and the relevant installer, inspector, and authority.

Englander wood stoves at a glance

“Englander wood stove” can refer loosely to several products, but the categories are not interchangeable:

• A freestanding residential wood stove is a solid-fuel heater intended for an approved residential installation.
• A fireplace insert is designed for installation in a fireplace and has model-specific fireplace, connection, and venting requirements.
• A pellet appliance burns processed pellets and uses electrically powered feed and control components.
• A portable camp stove is intended for a different environment and should not be treated as a substitute for a listed residential heater.

The captured Englander wood-stove catalog lists four freestanding Blue Ridge models: the Blue Ridge 100 (ESW0001), Blue Ridge 300P (ESW0007), Blue Ridge 300L (ESW0008), and Blue Ridge 500 (ESW0012). It also displays filters for size, heating area, power, EPA 2020 status, mobile-home installation, and alcove installation. The supplied catalog excerpt does not reveal which filter values apply to each stove.

Third-party retailers also list Blue Ridge fireplace inserts, as well as portable Cub, Black Bear, and Grizzly camp stoves. Those listings show that the products have appeared in retail channels; they do not establish that every retailer-listed product belongs to the current official lineup. Englander’s site separates wood stoves, wood inserts, camp stoves, and outdoor fireplaces into different categories.

Englander states that its products have been made in the United States since 1976. This is a manufacturer statement, not independent confirmation of the manufacturing or assembly location of every current model.

The available evidence is strongest on model identity, displayed prices, captured stock status, and the support tools visible on Englander’s website. It is much weaker on current Blue Ridge output, efficiency, emissions, dimensions, weight, clearances, approvals, warranty terms, and included equipment.

Evidence-label key

• Manufacturer-listed: Displayed on Englander’s website, generally for model identity, price, stock status, product categories, or support tools.
• Retailer-reported: Published by a third-party seller and useful as a lead, but still requiring confirmation in the exact model manual or certification record.
• Conflicting: Two claims disagree or may rely on different fuels, tests, definitions, operating conditions, or promotional assumptions.
• Not established: The supplied evidence does not reliably answer the question.

The catalog is therefore useful as a shopping snapshot, but it is not enough to select a stove, approve an installation, or design a chimney system.

Current Blue Ridge listings and captured prices

The captured listings form a four-model price ladder. All four appliances were marked in stock, with displayed prices from $1,049 to $1,749. Because no capture date is established, these figures should not be described as verified current prices.

Model	Model number	Manufacturer-displayed price	Captured stock status	Evidence limitation
Blue Ridge 100	ESW0001	$1,049	In stock	Complete model-specific performance and installation specifications are unavailable
Blue Ridge 300L	ESW0008	$1,419	In stock	The catalog does not explain its practical differences from the 300P
Blue Ridge 300P	ESW0007	$1,449	In stock	Dimensions, output, clearances, and included components are not established
Blue Ridge 500	ESW0012	$1,749	In stock	Higher price does not establish capacity, suitability, or better household performance

A retailer collection displayed the same four prices—$1,049, $1,419, $1,449, and $1,749—for the corresponding Blue Ridge models, while also advertising changeable shipping, gift, and dispatch terms (Fyre Direct’s Englander collection).

The transparent differences between the captured manufacturer prices are:

• Blue Ridge 100 to 300L: $370
• Blue Ridge 300L to 300P: $30
• Blue Ridge 300P to 500: $300
• Blue Ridge 100 to 500: $700

These calculations cover the appliance prices only. They exclude freight, taxes, delivery services, hearth work, chimney or liner components, adapters, optional equipment, permits, labor, inspection, detectors, and maintenance.

Recheck before purchase: Prices, stock, freight, shipping terms, rebates, gifts, and fulfillment estimates can change. The source material does not establish a capture date.

Captured retailers did not always display the same amount. Fire Pit Surplus listed the Blue Ridge 100 at $1,029 and the Blue Ridge 500 at $1,599, respectively $20 and $150 below the captured manufacturer prices. The same retailer displayed $1,419 for the 300L and $1,449 for the 300P (Fire Pit Surplus’s Englander collection).

A lower appliance price does not necessarily produce a lower project total. Before comparing quotes, ask each seller to identify:

• Full model name and model number
• Current appliance price
• Freight and delivery method
• Curbside, residential, or lift-gate charges
• Included accessories, shields, or promotional items
• Expected dispatch and delivery windows
• Damage-reporting procedure
• Cancellation and return terms
• Written warranty terms
• Responsibility for return freight

The manufacturer page displays numbers in parentheses beside the products, but the captured excerpt does not define them. They should not be presented as verified review totals. Likewise, a manufacturer-selected “best seller” label is merchandising language unless supported by disclosed sales data; it does not prove popularity, quality, reliability, or suitability.

The available listings support a price comparison, not a value ranking. Price must be considered alongside output range, minimum useful output, installation fit, chimney compatibility, included equipment, and total installed cost.

How the Blue Ridge models can—and cannot—be compared

Model identity and captured price are better established than model-specific performance. The official catalog names the four appliances but does not provide enough information to compare their tested output, efficiency, emissions, dimensions, weight, or installation requirements.

A retailer reports the following firebox volumes and selected log lengths:

Model	Retailer-reported firebox volume	Retailer-reported maximum log length	Evidence status
Blue Ridge 100	1.8 ft³	Not established	Retailer-reported; confirm in exact manual
Blue Ridge 300L	2.4 ft³	Not established	Retailer-reported; heating-area advertising is not a household guarantee
Blue Ridge 300P	2.4 ft³	20 inches	Retailer-reported lead requiring official confirmation
Blue Ridge 500	3.5 ft³	22 inches	Retailer-reported lead requiring official confirmation

These figures appear in retailer collection descriptions and should be treated as leads for finding the correct documentation, not as final specifications.

The reported firebox figures suggest a small-to-large progression, with the 300L and 300P in a similar middle position. They do not prove equivalent output, burn behavior, efficiency, dimensions, clearances, or installation options.

The evidence does not resolve the practical difference between the similarly priced 300L and 300P. Their $30 captured price difference is not enough to explain function. Compare their exact documentation for:

• Overall and firebox dimensions
• Door orientation and loading arrangement
• Leg, pedestal, or base configuration
• Wall, corner, floor, and ceiling clearances
• Flue location and permitted venting arrangements
• Included shields, blower, ash equipment, or other components
• Hearth-protection requirements
• Mobile-home or alcove approval
• Tested output range, efficiency, and emissions
• Warranty terms

For all four Blue Ridge listings, the following are unavailable or unverified in the supplied evidence:

• Tested or advertised heating range
• Minimum and maximum output
• HHV and LHV efficiency
• Particulate emissions
• Appliance dimensions
• Appliance and shipping weight
• Wall, corner, ceiling, and floor clearances
• Hearth dimensions and protection values
• Mobile-home approval
• Alcove approval
• Complete warranty terms

One retailer collection repeatedly displayed dimensions of 17½ by 12 by 4¾ inches beside materially different stoves and fireplace inserts. Because the same measurements appear across unlike products, they may describe an accessory or result from a catalog or extraction error. They should not be used to plan a hearth, wall clearance, fireplace opening, delivery route, or chimney connection.

Use a worksheet rather than borrowing specifications from a similar model:

Comparison field	Blue Ridge 100	Blue Ridge 300L	Blue Ridge 300P	Blue Ridge 500
Exact model number	ESW0001	ESW0008	ESW0007	ESW0012
Official manual revision/date
Certification or EPA record
HHV efficiency
Tested output range
Particulate emissions
Firebox volume
Maximum/recommended log length
Overall dimensions
Appliance/shipping weight
Wall and corner clearances
Ceiling or alcove clearances
Hearth requirements
Flue and chimney requirements
Included accessories
Separately required components
Written warranty
Total installed cost

Leave a field blank until it can be confirmed for the exact model. A missing figure is a question to resolve; a borrowed figure can become a purchasing or installation error.

Sizing an Englander stove for the house rather than square footage alone

An advertised square-foot range is a starting category, not a promise that a stove will maintain a particular temperature in a particular home. Two houses with the same floor area can have substantially different heating requirements.

A compact, well-insulated home with an open plan may retain and distribute heat more effectively than a same-size home with air leakage, older windows, high ceilings, divided rooms, or greater exposure to cold and wind. Stove position also matters: heat produced in a central room will not necessarily behave like heat produced in a basement or at one end of a compartmentalized floor plan.

A practical sizing worksheet should cover six areas.

1. Heating role

Define whether the stove is expected to:

• Provide occasional comfort heat
• Reduce demand on the primary heating system
• Heat one occupied zone
• Maintain part of the house during an outage
• Serve as a major or primary heat source

A stove selected for occasional supplemental use may not fit a primary-heating plan. A large stove selected for maximum outage capacity may also deliver more heat than its immediate room needs during milder weather.

2. Local winter conditions

Record:

• Typical winter temperatures
• Expected coldest operating conditions
• Wind exposure
• Elevation, where relevant
• Duration of severe cold periods

The useful target is the building’s estimated heat loss under local conditions, not a national square-foot category by itself.

3. Building envelope

Consider:

• Insulation levels
• Window condition and area
• Door and wall air leakage
• Number of exterior walls
• Whether the area is over a basement, crawlspace, slab, or unconditioned space
• Recent air-sealing or insulation work

Floor area alone does not describe how quickly a building loses heat.

4. Interior volume and layout

Record actual ceiling heights and identify:

• Open versus divided rooms
• Stairways and multi-level connections
• Doorways that may restrict heat movement
• Rooms distant from the proposed stove
• Whether mechanical circulation would be available during an outage

Two 2,000-square-foot homes can present very different distribution problems when one has an open plan and the other has many enclosed rooms.

5. Stove location

For each proposed position, ask:

• Is it central to the occupied area?
• Which rooms are likely to receive heat first?
• Could the immediate room become too warm before distant rooms heat?
• Does the position allow a model-compliant chimney route?
• Can all required clearances and hearth dimensions be accommodated?
• Can fuel be brought to the stove conveniently?

6. Building heat-load estimate

For a serious primary-heating or outage-heating plan, use a building heat-loss assessment to identify an appropriate output range. The lower end matters as well as the maximum: a candidate must fit ordinary operating conditions, not only the coldest expected day.

A commercial 2025 sizing guide gives broad examples of small stoves for roughly 1,000–1,200 square feet, medium stoves for 1,500–2,000 square feet, and large stoves for about 2,200 square feet or more. These are generic categories, not Englander ratings, and the guide also identifies climate, insulation, layout, placement, and intended heating role as relevant factors (Rise’s sizing discussion).

Compare performance on equivalent bases rather than selecting the largest promotional BTU number.

Efficiency figures also require consistent definitions:

Compare HHV with HHV, not one stove’s HHV result with another stove’s LHV figure.

Three commonly quoted specifications answer different questions:

• Firebox size describes approximate chamber volume available for fuel; it does not guarantee output or burn time.
• Heating-area claims estimate potential coverage under assumed conditions; they do not establish performance in a specific home.
• Log length concerns loading and fuel preparation; it does not establish how much useful heat reaches the building.

Use this sequence:

1. Define whether the stove will provide supplemental, zonal, outage-resilient, or primary heat.
2. Estimate the building load and identify heat-distribution constraints.
3. Shortlist appliances with a suitable tested output range.
4. Validate each exact model’s output, low-burn behavior, efficiency basis, clearances, and chimney requirements in official documentation.
5. Reject any candidate that does not fit both the heating need and the proposed installation location.

The older 32NC as a technical example—not a proxy for Blue Ridge models

The supplied evidence does not establish whether it remains a current product, whether a particular available unit is new, display, remaining, or used stock, or which Blue Ridge model—if any—officially replaced it.

It remains useful as an example of the technical fields buyers should seek for every stove. The following values are retailer-reported and must not be transferred to a Blue Ridge appliance.

32NC specification	Retailer-reported value
Combustion type	Non-catalytic
Firebox volume	3.5 ft³
Claimed heating range	900–2,400 ft²
Specified maximum output with dry cordwood	41,480 BTU/h
Average efficiency	69% HHV; 74% LHV
Optimum efficiency	76%
Average particulate emissions	2.0 g/h
Width	23 inches
Height	29 5/8 inches
Depth	31 1/2 inches
Shipping weight	440 pounds
Maximum log length	20 inches
Recommended log length	16 inches
Flue outlet	6 inches
Recommended chimney	6-inch diameter
Reported minimum chimney height	15 feet

These values come from a detailed 32NC retailer profile. The seller also describes the model as EPA 2020 approved and lists multiple safety and emissions standards. Direct confirmation in the installation manual and applicable certification record is preferable, particularly for display, remaining-stock, or used equipment.

The page also illustrates why promotional claims require context:

• The specification table states a maximum burn time of 10–12 hours, while promotional copy says up to 14 hours.
• The specification table lists 41,480 BTU/h as maximum output with dry cordwood, while other promotional wording claims the stove can produce more than 75,000 BTU.

The supplied evidence does not resolve those discrepancies. They may reflect different fuels, loading methods, test procedures, output definitions, short peaks, sustained output, or promotional rounding. Neither the 14-hour claim nor the greater-than-75,000-BTU claim should be treated as definitive.

A second retailer description reports a steel body, ceramic-glass window, refractory-brick lining, and stainless-steel secondary-air system. That detailed construction description is more consistent with the 32NC profile than a separate retailer’s broad characterization of it as a cast-iron stove. The supported description is a steel-bodied stove with a cast-iron-framed door, not a cast-iron stove.

Most importantly, the Blue Ridge 500’s retailer-reported 3.5-ft³ firebox does not make it the same appliance as the 32NC. Shared firebox volume cannot establish shared output, dimensions, clearances, certification, combustion design, chimney requirements, weight, or warranty.

Do not transfer any 32NC dimension, performance figure, chimney requirement, certification, mobile-home condition, or warranty term to the Blue Ridge 500 or another Blue Ridge model.

Installation questions to answer before ordering

This is a pre-purchase verification checklist, not installation guidance. The controlling sources should be the exact model manual, its listing and certification information, applicable local requirements, and the determinations of the relevant installer, inspector, and authority.

Exact appliance identity

• What full model number will appear on the invoice and rating plate?
• Is the appliance a freestanding stove or a fireplace insert?
• Does the supplied manual revision apply to that model and configuration?
• Does the certification record match the exact model?
• Do optional legs, pedestal components, shields, or blowers affect the documented installation configuration?

Clearances

Ask the seller or installer to identify the exact-model requirements for:

• Rear-wall clearance
• Side-wall clearance
• Corner installation
• Floor and ceiling separation
• Alcove installation
• Mantel and trim clearance, where applicable
• Connector-pipe clearance
• Any documented reduced-clearance configuration

Do not derive these measurements from a product photo, retailer snippet, similar model, or duplicated collection-page dimensions.

Chimney and venting

Have the proposed route evaluated against the exact model documentation. Questions include:

• What diameter is specified?
• What chimney type and listing are required?
• What height and configuration are documented?
• Is the proposed route interior or exterior?
• What support and termination arrangement applies?
• Is an existing chimney in suitable condition for the proposed appliance?
• What combustible clearances apply along the complete route?
• Is the outlet and connector arrangement compatible with the appliance?

For example, the retailer profile reports a 6-inch flue, recommended 6-inch chimney, and 15-foot minimum chimney height for the 32NC. Those figures apply only to that reported model and cannot be generalized to the Blue Ridge range.

Hearth, structure, delivery, and lifting

Confirm from model-specific and site-specific sources:

• Required noncombustible hearth dimensions
• Whether the documented protection is limited to ember protection or includes a thermal value
• Appliance weight and shipping weight
• Floor loading and structural suitability
• Door, stair, hallway, and turning clearances
• Pallet or packaging dimensions
• The planned moving and positioning method

The reported 440-pound shipping weight of the 32NC illustrates why delivery access and lifting belong in the buying decision. It does not establish the weight of a Blue Ridge model.

Outside air, mobile homes, and alcoves

The 32NC retailer profile describes that model as approved for mobile-home installation in the United States only when outside air is installed. That is a model-specific condition and cannot be applied to every Englander stove.

Englander’s catalog includes mobile-home and alcove filters, but the supplied excerpt does not identify the qualifying Blue Ridge models. Before considering either installation type, obtain written confirmation of:

• Exact-model approval
• Required outside-air components
• Anchoring conditions
• Permitted chimney system
• Shielding and clearance requirements
• Any jurisdictional restrictions

Permits, inspection, and life-safety questions

Ask the local authority, insurer, and proposed installer:

• Is a permit required?
• What inspection stages apply?
• Must the installer hold a particular qualification?
• Is professional installation or inspection required?
• Are there local amendments affecting the hearth, chimney, or clearances?
• What records must be retained for insurance or resale?
• Where should smoke and carbon-monoxide detectors be placed?
• What inspection and maintenance schedule applies to the chimney?

A commercial wood-stove guide emphasizes professional installation or inspection, correct venting and clearances, detectors, and chimney maintenance, but it is not a substitute for the exact manual or local authority.

Included and separately purchased equipment

Ask the seller to itemize what is included. Potential separate purchases may include:

• Blower
• Side or rear shields
• Outside-air kit
• Stove connector
• Listed chimney sections
• Chimney supports and termination components
• Liner or appliance adapter
• Insert surround components
• Hearth pad or site-built hearth materials
• Anchors or floor-protection components
• Delivery, lifting, or positioning services

The evidence does not support a “typical installation price.” Labor, access, chimney condition, liner requirements, permits, hearth work, and regional pricing can change the total substantially. Obtain a site-specific written estimate.

Parts, manuals, warranty resources, and the limits of owner reviews

Englander’s website visibly offers or links to:

• Product manuals
• Replacement-part search
• Accessories
• Warranty information
• Retailer search
• Heating-area guidance
• Stove-selection tools

These resources are visible on the Englander website, but their existence does not prove that a specific part is in stock, that a warranty claim will be approved, or that qualified local service is available. They also do not establish response times, labor coverage, shipping responsibility, or owner satisfaction.

Third-party 32NC pages mention a five-year limited warranty. The evidence does not establish its exclusions, labor coverage, transferability, claim process, shipping obligations, or applicability to any current Blue Ridge model.

Older owner discussion provides limited context. In a forum thread dating largely from 2012–2014, some participants praised simple designs, parts access, technical help, and repair information. Others reported maintenance demands or component problems. Most of the discussion concerned pellet stoves rather than current cordwood models, making it unsuitable for conclusions about present Blue Ridge reliability (archived owner discussion).

Reports about those systems should not be transferred to a freestanding cordwood stove.

The supplied commercial pages and anecdotal forum thread do not support ranking Englander for durability, value, reliability, repairability, or customer service.

Before buying:

• Download and save the exact manual.
• Verify that it matches the full model number.
• Obtain the complete written warranty.
• Review exclusions and claim procedures.
• Identify local warranty and non-warranty service options.
• Confirm whether labor, travel, freight, removal, and reinstallation are covered or excluded.
• Check availability and price of model-specific wear components.
• Ask about firebrick, baffles, door gasket, glass, handles, and air-control parts for the exact model.
• Record the seller’s legal name and contact information.
• Retain the invoice, delivery record, serial number, installation documents, and inspection record.
• Photograph the rating plate when it is accessible.

A definitive ownership assessment would require current wood-stove-specific owner data, technician evidence, meaningful sample sizes, verified failure rates, maintenance records, parts-fill rates, and documented warranty outcomes. Those data are not available here.

A final pre-purchase decision checklist

Complete this checklist for the exact appliance and installation location.

Appliance identity

• [ ] Complete model name and model number confirmed
• [ ] Product category confirmed: freestanding stove, insert, pellet appliance, or camp stove
• [ ] Seller’s invoice identifies the exact model
• [ ] Official manual obtained for the exact model and configuration
• [ ] Corresponding certification or listing record located

Performance

• [ ] Heating role defined: supplemental, zonal, outage, or primary
• [ ] Building heat loss or reasoned sizing assessment completed
• [ ] Tested output range confirmed
• [ ] Minimum useful output considered
• [ ] HHV efficiency compared with HHV efficiency
• [ ] Particulate emissions confirmed from model-specific documentation
• [ ] Firebox volume and log length verified
• [ ] Climate, insulation, leakage, ceiling height, layout, and placement considered
• [ ] Heating area, output, and burn-time advertising not treated as guarantees

Installation

• [ ] Appliance dimensions and weight verified
• [ ] Wall, corner, ceiling, floor, alcove, and mantel clearances confirmed as applicable
• [ ] Hearth dimensions and protection value confirmed
• [ ] Delivery route and lifting plan assessed
• [ ] Floor suitability addressed
• [ ] Chimney diameter, type, height, and configuration matched to the exact model
• [ ] Existing chimney or fireplace evaluated for the proposed appliance
• [ ] Outside-air requirements confirmed
• [ ] Mobile-home or alcove approval documented, if relevant
• [ ] Permit and inspection requirements confirmed
• [ ] Detector questions addressed with the relevant authority
• [ ] Professional installation or inspection requirements included in the plan

Total cost

• [ ] Appliance price confirmed in writing
• [ ] Freight and delivery services itemized
• [ ] Included parts and accessories listed
• [ ] Required optional components priced
• [ ] Return, cancellation, and damage terms documented
• [ ] Expected availability confirmed
• [ ] Budget includes the appliance
• [ ] Budget includes delivery and lifting
• [ ] Budget includes hearth work
• [ ] Budget includes chimney construction or liner work
• [ ] Budget includes connectors and adapters
• [ ] Budget includes outside-air components, if required
• [ ] Budget includes permits, labor, and inspection
• [ ] Budget includes detectors and continuing chimney maintenance

Ownership support

• [ ] Complete written warranty obtained
• [ ] Warranty exclusions and claim procedures understood
• [ ] Responsibility for labor and freight confirmed
• [ ] Local service options identified
• [ ] Model-specific wear-part availability and prices checked
• [ ] Invoice, serial number, manual, installation record, and inspection documents will be retained

A larger or more expensive Englander stove is not automatically better. Maximum capacity must be balanced against minimum output, placement, heat distribution, loading convenience, clearances, chimney compatibility, and total installed cost.

Frequently asked questions

Which Englander wood stoves are listed on the captured manufacturer catalog?

The captured manufacturer catalog lists four freestanding Blue Ridge wood stoves:

• Blue Ridge 100 — ESW0001
• Blue Ridge 300P — ESW0007
• Blue Ridge 300L — ESW0008
• Blue Ridge 500 — ESW0012

All four were marked in stock on the captured manufacturer catalog. Because the capture date is not established, the lineup, prices, and stock status must be rechecked.

What is the difference between the Blue Ridge 300L and 300P?

The supplied evidence does not establish the practical difference. A retailer reports that both have 2.4-ft³ fireboxes, and their captured manufacturer prices were $1,419 and $1,449, a difference of $30 (Fire Pit Surplus’s model listings).

Those facts do not prove identical performance or construction. Compare exact manuals for dimensions, door or base configuration, included equipment, output range, clearances, venting, certifications, hearth requirements, and warranty terms.

Is the Englander 32NC still available, and what Blue Ridge model replaced it?

The evidence does not establish whether the 32NC is current, discontinued, or available only as display, remaining, or used stock. It also does not identify an official Blue Ridge replacement.

Retailers associate both the 32NC and Blue Ridge 500 with a 3.5-ft³ firebox, but that shared figure does not prove that one replaced the other. No 32NC specification should be transferred to the Blue Ridge 500.

Can an Englander wood stove be installed in a mobile home?

Only if the exact model is approved for that use and every documented condition is satisfied. A retailer describes the 32NC as approved for mobile-home installation in the United States only when outside air is installed (32NC retailer specifications). That condition cannot be generalized to current Blue Ridge models.

Englander’s catalog displays a mobile-home filter but does not identify qualifying models in the supplied excerpt. Confirm the exact model’s listing, outside-air components, anchoring, chimney, clearances, and local approval requirements.

How much does an Englander wood stove cost before installation?

The captured manufacturer prices were $1,049 for the Blue Ridge 100, $1,419 for the 300L, $1,449 for the 300P, and $1,749 for the Blue Ridge 500. Retailer listings varied, including $1,029 for the Blue Ridge 100 and $1,599 for the Blue Ridge 500.

These are undated listing snapshots, not verified current quotes. They cover the appliance listing rather than the complete project. Freight, delivery, hearth work, chimney or liner components, adapters, outside air, permits, labor, inspection, detectors, and maintenance must be budgeted separately.

The available evidence supports a four-model catalog and price snapshot, not a definitive best-model ranking. Use the 32NC only to understand which technical metrics matter. Do not purchase until the exact stove, installation location, chimney plan, clearances, approvals, included equipment, support arrangements, and full project budget have been reconciled.